Worth Data 520-RF User Manual download pdf (Page 22)

RF Base Station Parameters

The following parameters apply only to a base station attached serially.

Baud rate

300 0

600 1

1200 2

2400 3

4800 4

9600 5

19,200 6

Data bits

7 Bits 0

8 Bits 1

Set the data bits ("word length") to the same setting your terminal is using, or

you want to use with your serial port.

Parity

None 0

Even 1

Odd 2

Set parity to the same setting your terminal is using, or the one you want to use

with your serial port. None is usually used in conjunction with 8 data bits,

Even or Odd with seven data bits.

Stop bits

1 Bit 0

2 Bits 1

Set the stop bits to the same setting your terminal is using, or you want to use

with your serial port.

Protocol

This parameter only applies to serial operation of a Base Station.

None 0

Host Controlled Acknowledge 1

"None" means that Base Station will immediately transmit an acknowledgement to

the RF Laser from which it has just received transmitted data, (without waiting for

a response from the host computer program.)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

Worth Data 520-RF User Manual Page 22