Worth Data 520-RF User Manual download pdf (Page 6)

USB Installation

USB attachment will not work with the Worth Data F10 5v power supply for

the B78 Base Station. If for some reason your USB port or hub does not have

enough power to operate the Base Station correctly, you will need a powered

USB Hub. The Base Station will power up with 3 more flashes than the

channel setting; i.e. if it is set on Channel 0, it will flash green three times. If

the Channel were set to 7, it would flash green 10 times.

Once you connect the B78 Base Station to the computer using the supplied

USB cable, the Base Station should be sensed automatically by the computer

and the driver installation will begin. Windows® usually finds the necessary

driver on the hard drive under /Windows/System 32/Drivers; occasionally you

will have to insert the original Windows CD. The Mac always finds the driver.

In either case, the driver used is the standard keyboard driver. No special

drivers are required.

You should be connected as below:

If you mistakenly abort your driver installation, see the Trouble Shooting

Section of this manual.

For testing, bring up Notepad or WordPad on your computer and scan the

TEST LABEL on page 21. Now turn to page 7.

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

No comments

Worth Data 520-RF User Manual Page 6