Worth Data 701 RF Owner's Manual Page 17
- Page / 87
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
13
ble transmission of the ISBN format, set option 7 to ON. To return to the default of normal EAN-13 transmission, set option 7
to OFF. For details on ISBN, see Appendix J, UPC/EAN.
UPC-A can be transmitted in EAN-13 format by adding a leading 0 (USA county code) to the UPC-A data. To transmit in
EAN-13 format, set option 8 to ON.
UPC-E / EAN-8 Options
UPC-E First Digit
ON
OFF
1
EAN-8 First Digit
ON
OFF
2
UPC-E Check Digit
ON
OFF
3
EAN-8 Check Digit
ON
OFF
4
UPC-E Expanded
ON
OFF
5
UPC-E1
ON
OFF
6
Use setting 1 and 2 to enable or disable the UPC-E or EAN-8 first digit.
Use setting 3 and 4 to enable or disable the UPC-E or EAN-8 check digit. The check digit is the last character and is based upon
a calculation performed on the other characters.
Use setting 5 to select UPC-E0 compressed or expanded. When set to ON (the default setting) UPC-E1 codes are transmitted as
is, when set to OFF UPC-E1 codes are transmitted with inserted zeros to make them the same length as a UPC-A bar code. An
NSC of 0 is assumed.
Use setting 6 to enable the reading of UPC-E1 bar codes. Do not enable UPC-E1 if you plan on reading EAN-13 bar codes. You
may experience partial reads when reading ENA-13.
If you prefer to transmit UPC-E bar codes in a 6-digit format while EAN-8 is transmitted in its original 8-digit format, set option
7 to ON.
Code 128
Code 128
ON
OFF
1
UCC/EAN 128
ON
OFF
2
UCC/EAN-128 is a subset of Code 128 that follows certain specifications regarding character content, length and check digits.
Enabling UCC/EAN-128 (2) causes the RF Terminal to look for a Code 128 bar code that begins with the Code 128 F1 (Func-
tion 1) character. See Appendix A: Code 128 for more details.
Codabar
Codabar
ON
OFF
1
Codabar CLSI
ON
OFF
2
Start Stop Character
ON
OFF
3
CLSI is a form of Codabar often used by libraries.
Setting 3 will transmit the Codabar start and stop characters with the bar code data to your computer. If you are varying the start and
stop characters to differentiate between different labels, transmitting the start and stop can be helpful. See Appendix A; Codabar for
more information.
- RF Terminal 1
- Table of Contents 3
- Introduction 5
- Chapter 1: 6
- Base station channel… 7
- RF Terminal Operation 8
- Charging Battery 9
- Please Wait……… 9
- Battery Charge Complete 9
- RF Terminal Menu Functions 10
- Running the Test Program… 11
- Chapter 2: 12
- Setup Group 13
- Parameter 13
- Shut Down Time 14
- Control Keys Only 15
- Bar Code Options 16
- UPC-E / EAN-8 Options 17
- 2 of 5 Code 18
- MSI and Plessey 18
- Code 93 / Code 11 18
- DataBar / RSS-14 Options 18
- Bluetooth Settings: 19
- Date & Time Setting 20
- Speaker Settings 20
- Laser Options 21
- LCD Options 22
- Other Settings 22
- Postamble 23
- Characters 24
- Data Encryption 24
- System Tools 25
- Chapter 3: 26
- Chapter 4: 28
- How Site Survey works 30
- Chapter 5: 31
- Performing a Site Survey 32
- Relay Stations 33
- Relay Installation 34
- Chapter 6: 35
- Failure Planning 36
- Planning 37
- Host to Terminal Programming 37
- Command charac 38
- Command function 38
- Color Display Programming 39
- Base Station to Host Formats 43
- Serial Reply 43
- Base Station Error Feedback 44
- Sequence Error Message 45
- Illegal Command 45
- Automatic Check Back 46
- Code transmitted to Host 47
- Chapter 7: 48
- Properties – ActiveX Object 49
- Methods – ActiveX Object 49
- Events – ActiveX Object 53
- Programming Considerations 55
- Concepts - TCP/IP COM 56
- Events - TCP/IP COM 58
- Chapter 8: 60
- Portable Label Printing 61
- Chapter 9: 62
- Assigning Error Messages 63
- Default Voice Messages 63
- Chapter 10: 64
- Terminal Error Messages 65
- My response time is poor 66
- RF Terminal Problems 67
- Problems reading Bar Codes 67
- Problems with Voice Prompts 68
- If you still have a problem… 68
- Chapter 11: 69
- Chapter 12: 70
- Adding Relays 71
- Routing the Wiring 72
- Relay Station RS422 Pin-outs 72
- Relay Test Plan and Failures 73
- Testing the Relay 73
- Base Station Cable Choice 74
- Appendix A: 76
- Accumulate Mode 77
- Code 93 Specifications 78
- Codabar Specifications 78
- Code 128 Specifications 79
- Supplemental codes 82
- ISBN Specifications 83
- UPC-E Checksum Calculation 84
- MSI/Plessey Specifications 85
- Appendix B: 86
- ASCII Code Equivalent Table 87
© 2020, manymanuals.com. All rights reserved. | 0.309 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals